How to Create Bootable Pen Drive to Install Windows 7, 8.1 or 10

Sometimes you may want to create a Bootable pen drive for installing Windows by using it.

There are two ways to do it,

1 you can use software

2 you can use manual way

Most of the people who do not have the knowledge of IT are using software to create Bootable pen sometimes they are lazy people, that’s why they are using software, and we don't know about those software's safety, there may be some virus or malware inside those software, so why are you taking risk or else you can use manual way, it is fun and we can improve our knowledge, to use a software we do not need a knowledge, but here we should have a technical knowledge for understating, if you want you can download software from internet, or use this method and be a knowledgeable person, so I’ll tell you how to create a Bootable pen drive.

Frist of all you have to open RUN

WinKey+R

Now you have to type CMD on the RUN and press Enter

Now you can see the Command Prompt and we have to go to C: drive, so do what I do below

First type CD.. and press Enter Key

Again you have to type CD.. Press Enter Key, then you will be in C: drive

Here we have to access to windows folder, so we type CD Windows and Press Enter Key

Now you are in Windows Folder, then we have to enter to System32 folder, so we should type CD System32 and Press Enter Key

Now we want to open a file name called Diskpart, so we have to type it here like below and press Enter Key

Type Diskpart

Then you will see User Account Control Box and Click Yes button,

Now there will be another windows just same like Command prompt, it is DiskPart Prompt here after we type our command on this prompt.

Now type list disk and press Enter

It will show you the entire list of Disk which are in your computer

As you can see above, it will show your disks, Disk 0 is my computer hard drive, Look at the Size of it, it is 465GB, and Disk 1 is 7683MB so the pen drive is Disk 1

As we know, now we have to select disk 1 as our drive, so type select disk 1 and press Enter.

Now you will see a message Disk 1 is now the selected disk

Now we have to type Clean and press Enter, then it will remove the previous settings of the pen drive.

Now you will see a message says DiskPart succeeded in cleaning the disk.

Now we have to create Bootable partition, so we have to type Create partition primary then press Enter,

Then you will see DiskPart succeeded in creating the specified partition.

Now select the partition, type select partition 1 and press enter

So you can see a message Partition 1 is new the selected partition.

Now you have to active the Bootable partition so type Active and press enter then you will see a message DiskPart marked the current partition as active.

Now we want to format the Pen drive,

format fs=ntfs

Or else if you want to format it quickly you can type

format fs=ntfs quick

If it is not working, you can format it by using format fs=fat32

Then you will see Diskpart successfully formatted the volume.

Now mostly your AutoPlay window will play, don’t choose any option, or else it will play on next time, don’t select any option close it.

Now type assign and press Enter, then you will see DiskPart successfully assigned the drive letter or mount point.

Now exit from the Diskpart.exe prompt to do that type Exit and press enter and Exit from the command prompt also.

Now go to my computer and copy windows files to the pen drive, that’s all, now the Bootable pen drive is ready to work

Note : if you want to make Bootable pen for installing Windows 7, it's OK to use 4 GB or Higher capacity  pen drive and if you are going to install Windows 8 or higher, then you must have 8 GB or Higher capacity pen drive. You may had a problem how to install windows by using pen drive, now it's ove

Thanks a lot, hope you could get something, if you have any problem, please contact me.

Hesh
~~esh~~